Our soy wax container is specifically developed for the production of container candles. This soy container wax has been designed to produce candles with a premium quality finish, excellent scent throw and superb glass adhesion. The soy container wax may be used with fragrance at levels up to 10-12%. Our soy wax is suitable for blending with fragrances and oil soluble dyes. Our soy wax is biodegradable and vegan friendly. No animal products are used and no animal testing has been carried out in its manufacture. Soy wax container does not require additives, other than fragrance and colour required by the Candle maker. Wax should be stored in a cool, dry location away from direct heat, sunlight and moisture.
Colour
Most dyes work with our Soy wax, powder, liquid, chips, blocks, etc. When using powder dyes, heat the wax to approx. 75°C, add the dye and mix until dissolved. Powder dyes may also be dissolved in fragrance and then added to the melted wax, be sure that the dye has dissolved completely before adding. When using powder dyes dissolved in fragrance, liquid dyes, or colour blocks heat the wax to 75°C. If you wish to make your candle darker or “richer”, add a little black dye to the colour you are using.
Fragrance
Our Soy wax has been designed for fragrance at levels between 10-12%%. Fragrance which is specifically developed for use with natural waxes is highly recommended. Burn pool size and depth greatly affect fragrance throw so correct wicking is paramount. Some fragrances may react poorly with the wax causing bleeding, objectionable surface finishes or poor flame quality. This has been found to be exaggerated when using fragrances specifically designed for use in Paraffin wax candles.
Wicking
Natural waxes tend to require larger wick sizes than traditional paraffin waxes. Fragrance, colour and candle configuration have a great impact on the best wick choice. Too large of a wick may cause sooting, accelerated burn times and guttering (wax leaking through the side of the candle). Too small a wick will cause tunneling and produce a smaller flame. Keep wicks trimmed to ¼ inch. If you experience poor flame quality or stability, try a different type of wick. Test burning should be done after the candle has had a chance to sit for 48 hours after pouring.
Melting
Temporary high temperatures (up to 85°C) have no adverse effect as long as the wax is cooled back down quickly. Higher temperatures may cause the wax to discolour. Allow the wax to cool to your desired pour temperature, add the fragrance and mix well. Be sure to stir/mix the wax while melting. Stainless Steel is the material of choice although mild steel is acceptable. Digital temperature probes are readily available and are a safer choice than the traditional Mercury in glass type.
Pouring
Pour temperatures may vary according to mould container type, fragrance & dye used and the effects the candle maker wishes to achieve. Fragrance should be added and mixed immediately prior to pouring where practical. If you experience difficulties with your pour temperature, try a lower or higher temperature in increments of 5 - 10°C.
Candle Cooling
Cool undisturbed candles at room temperature (about 25°C). Candles should be allowed to sit undisturbed for 48 hours before test burning. Test Burn: Check wicking. Test burn the candle for burn pool diameter and “mushrooming” after it has cooled for 48 hours. Mushrooming is when carbon and/or other substances build up on the end of the wick interfering with combustion. Mushrooming can cause sooting and poor odours. Try different wicks until you have your desired burn pool diameter and a good clean flame.
Congealing point : 34.0°C Melting point: 45.5°C
Max melting temp: 85.0°C Flash point : >150°C
Please Note: - That we recommend that you carry out your own tests, as results may vary depending on individual recipes. It is the customer's responsibility to test for compatibility before proceeding with manufacture. Soy wax can frost this does not effect the final product.
Please note we only ship wax to UK main land due to weight.
